|
|
|
Wand Tilters:
- Optional wood wand tilters are available at no charge if
specified at time of order.
Please note: When wood wand tilters are specified, the valance
attachment will be with plastic clip track and clips.
|
 |
|
|
|
|
Slat Width |
1 3/8 in., 2in., 2 1/2 in. |
|
Minimum Blind Width |
9 inches |
|
Maximum Blind Width |
96 inches |
|
Minimum Blind Length |
9 inches |
|
Maximum Blind Length |
120 inches |
|
Maximum Width of a Single Blind |
72 inches |
|
Maximum Width of 2 or 3 Blinds on 1 Headrail |
96 inches |
|
Maximum Square Feet - Single Blind |
48 Square Feet |
|
Headrail Type and Dimensions |
Steel - Low Profile 2 in. x 1 1/2 in. |
|
|
Aluminum 2 in. x 2 in. (with loop controls) |
|
Bottom Rail |
Trapezoidal 1 3/8 in., 2 in., 2 1/2 in. |
|
Tilt Control |
Standard cord tilter with clutch system |
|
|
Optional wood wand tilter - no charge |
|
Colours |
36 Standard colours/finishes |
|
Ladder |
Standard polyester - colour coordinated |
|
Hold Down Brackets |
Metal bracket & pin - no charge if requested at time of order |
|
Extension Brackets |
L-shaped metal bracket 4 7/8 in. long - no charge if requested at time
of order |
|
Control Locations |
Standard is tilt left, lift right |
|
|
Optional lift left, tilt right |
|
|
Optional lift left, tilt left |
|
|
Optional lift right, tilt right |
|
Blind with tilt only operation |
9 in. to 10 3/8 in. wide |
|
Blind must have split controls |
10 1/2 in. to 20 in. wide |
|
Blind can have controls any position |
20 in. or wider |
|
Warranty |
Limited Lifetime |
|
Normal Production Time |
7 days |
|
|
|
|
Approximate Stacking
Height by Length |
|
BLIND LENGTH |
STACKING HEIGHT |
| 24 inches |
5 inches |
| 36 inches |
6 inches |
| 48 inches |
7 inches |
| 60 inches |
8 inches |
| 72 inches |
9 inches |
| 84 inches |
10 inches |
| 96 inches |
11 inches |
|
|
Number of Support Ladders |
|
BLIND WIDTH |
NUMBER of LADDERS |
| 9 to 36 inches |
2 |
| 36.1 to 60 inches |
3 |
| 60.1 to 84 inches |
4 |
| 84.1 to 100 inches |
5 |
|
|
|
|
